System compatibility – Is it possible to use the LEICA SF 58 flash unit with all Leica system cameras?
Compatible in TTL flash mode with: M-System: LEICA M6 TTL, LEICA M7, LEICA M8, LEICA M8.2, LEICA M9, Leica M (Typ 240) R-System: LEICA R8, LEICA R9 (analog) S-System: LEICA S2/S2-P Compatible...
Compatible in TTL flash mode with:
- M-System: LEICA M6 TTL, LEICA M7, LEICA M8, LEICA M8.2, LEICA M9, Leica M (Typ 240)
- R-System: LEICA R8, LEICA R9 (analog)
- S-System: LEICA S2/S2-P
Compatible in automatic or manual flash mode with all Leica System Cameras with hot shoe and x-contact
Why using a secondary reflector?
The LEICA SF 58 is ideal for indirect lighting due to its high flash guide number (max. 58 at ISO100/21°). The secondary reflector retains a bright illumination, creates highlights, lightens up sha...
The LEICA SF 58 is ideal for indirect lighting due to its high flash guide number (max. 58 at ISO100/21°). The secondary reflector retains a bright illumination, creates highlights, lightens up shadows, and delivers vivid colors.
White balance adjustment
The LEICA SF 58 has a color temperature of 5600K. Best photographic results are achieved by a camera white balance setting of “automatic” or “flash”.
The LEICA SF 58 has a color temperature of 5600K. Best photographic results are achieved by a camera white balance setting of “automatic” or “flash”.
Why the battery symbol of the Leica SF 58 is not displayed constantly?
The battery symbol is meant as a capacity warning and therefore only appears when the battery capacity will end soon.
The battery symbol is meant as a capacity warning and therefore only appears when the battery capacity will end soon.
Why is the menu only accessible after pressing one of the buttons a second time?
Pressing any of the menu buttons once illuminates the display. Only pressing twice will enter the respective menu modes.This procedure prevents accidental missetting.
Pressing any of the menu buttons once illuminates the display.
Only pressing twice will enter the respective menu modes.
This procedure prevents accidental missetting.
Why the zoom reflector is automatically adjusted, when the head is tilted/swivelled for indirect flash?
As soon as the reflector’s position is moved away from the frontal lighting position, the zoom adjusts automatically to 75mm to achieve an appropriate flash guide number which is sufficient for mos...
As soon as the reflector’s position is moved away from the frontal lighting position, the zoom adjusts automatically to 75mm to achieve an appropriate flash guide number which is sufficient for most photographic situations using bounce flash (maximum flash guide number at zoom setting 105mm!).
ライカ M (Typ 240) ファームウェアのアップデート方法
ライカMに入っているSDメモリーカードを初期化します。 カメラの電源を切り、SDカードを取り出し、パソコンと接続されているSDカードリーダーに 挿入します。(ファームウェアのアップデートにはこのカードリーダーが必要です。) ファームウェアをダウンロードするには、WEB上のライカMページ中のリンク「アップデート」をクリックし、ファームウェアの圧縮ファイルを解凍して下さい。 解凍され...
- ライカMに入っているSDメモリーカードを初期化します。
- カメラの電源を切り、SDカードを取り出し、パソコンと接続されているSDカードリーダーに 挿入します。(ファームウェアのアップデートにはこのカードリーダーが必要です。)
- ファームウェアをダウンロードするには、WEB上のライカMページ中のリンク「アップデート」をクリックし、ファームウェアの圧縮ファイルを解凍して下さい。
- 解凍されたファイル「FW_M240_1_1_0_2.FW」をSDカードの最上層に保存します。
- SDカードをカードリーダーから適切に取り出し、カメラに挿入し、底蓋を閉じます。
- INFO ボタンを押してホールドしながら、メインスイッチでカメラの電源を入れます。
- アップデートは2分から4分で完了します。スクリーン上にはアップデート中の表示が出ます。
- スクリーン上には、アップデート終了の表示が出ます。数秒後にはその表示も消えます。
注意事項:
バッテリーが十分充電されていない場合には、警告メッセージが出ます。必ずフル充電されたバッテリーをご使用下さい。
また、新しいバッテリーでは、バッテリーチャージャーの「CHARGE」LEDが点灯していても、実際のバッテリー容量がフル充電されていない場合があります。 そのような場合は、充電が完了してからライカMに入れて使い切るというサイクルを最初に2、3回行うことで、性能を十分に発揮できるようになります。